Model

Products

Item No & Description

Kennedy KEN503-0320K 12V/6V 4A Intelligent Automatic Battery Charger

Kennedy KEN503-0320K Automatic Battery Charger Robust battery charger suitable for home and light workshop use. Simple and easy to use. LED indicators. For WET batteries, AGM technology and GEL batteries. Optimised charging programme. Effiecient 3 stage charge. 100% rated output. Portable and lightweight. Intelligent c...

Kennedy KEN503-0350K 12V/6V 8A Intelligent Automatic Battery Charger

Kennedy KEN503-0350K Automatic Battery Charger Robust battery charger suitable for home and light workshop use. Simple and easy to use. LED indicators. For WET batteries, AGM technology and GEL batteries. Optimised charging programme. Effiecient 3 stage charge. 100% rated output. Portable and lightweight. Intelligent c...

Kennedy KN503-0960K Cooling System & Radiator Pressure Tester

Kennedy KEN503-0960K Cooling System Pressure Tester Cooling System & Radiator Cap Pressure Tester Designed for the pressure testing of cooling systems and radiator caps up to 35psi (2.5bar). Suitable for use on most makes of car and commercial vehicles, including: Mercedes, Ford, Chrysler, Peugeot, Honda, Lexus...

Kennedy KEN503-1130K Brake Fluid Tester AAA 1.5V

Kennedyt KEN503-1130K Brake Fluid Tester (Battery Operated) This ingenious tool is invaluable in the garage workshop for testing the quality of brake fluid. Testing for moisture content in the fluid by resistance to electric current. You get instant results from the built-in LED indicator light system. (Runs on 1 x 1.5...

Kennedy KEN503-1140K Petrol Engine Vacuum & Fuel Pump Tester

Kennedy KEN503-1140K Vacuum & Fuel Pump Tester Suitable for use on most engines, from cars to commercial vehicles and most motorcycles. Large, easy to read dual calibrated colour coded scale. Suitable for all types of spark plugs. Can be used on crankshaft seals in two-stroke engines. Suitable for testing and f...

Kennedy KEN503-1160K Petrol Engine Compressor Tester

Kennedy KEN503-1160K Compression Tester Suitable for all types of spark plugs. Finds faults in piston rings, valves, head gaskets and cylinder bores. Suitable for use on most petrol engine vehicles and motorcycles. Can be used on crankshaft seals in two-stroke engines. 195mm flexible hose. For use on 14mm and ...

Kennedy Ken503-1200K Spot Weld Remover

Kennedy KEN503-1200K Spot Weld Remover Suitable for cutting holes in steel metal, steel, plastic and brass. The hardened steel cutter is reversible increasing tool life. Adjusting the spring loaded, centre point screw accurately controls the depth of cut, allowing the top to be removed whilst leaving the lower ...

Kennedy Ken503-1240K Glow Plug Connector Pliers Straight Jaw

Kennedy KEN503-1240K Professional Glow Plug Connector Pliers Suitable for the removal of hard to reach glow plug connectors found on the latest generation of engines. Made from chrome vanadium steel. Composite handle provides added comfort and control. Blade length: 125mm.

Senator Sen503-1250K 2.5M x 10mm Copper Coated Alu' Booster Cables 300A

Senator SEN503-1250K Booster Cables 300A For use on cars and light commercial vehicles, these high quality, light duty copper coated aluminium cables are colour coded (Red = positive, Black = negative) and feature fully insulated clamps. 300A: 10mm2 diameter cable suitable for use on up to 1.5L petrol vehicles. Stor...

Kennedy Ken503-1260K Glow Plug Connector Pliers Angled Jaw

Kennedy KEN503-1260K Professional Glow Plug Connector Pliers Suitable for the removal of hard to reach glow plug connectors found on the latest generation of engines. Made from chrome vanadium steel. Composite handle provides added comfort and control. Blade length: 125mm.

Kennedy Ken503-1300K Ball Joint Service Toolset with 4X4 Adaptor

Kennedy KEN503-1300K Ball Joint Servicing Kit Made from cast iron and hardened carbon steel, this kit is designed for the removal of press fit type ball joints without having to remove the control arm from the vehicle. The kit can also be used for removing brake anchor pins and the servicing of universal joint ...

Kennedy Ken503-1400K Universal Ball Joint Remover

Kennedy KEN503-1400K arators Manufactured from drop forged alloy steel with slim tapered fork jaw for easier access into confined areas. Suitable for use on most car and light commercial vehicle ball joints. 100mm Overall Length - Restricted Access Designed for use in hard to reach and confined a...

Kennedy Ken503-1500K Trim Pin Remover 230mm O/A

Kennedy KEN503-1500K Trim Pin Remover Designed for removing vehicle trim panels and upholstery. Also used for replacing door locks, window mechanisms and general bodywork repairs.

Kennedy Ken503-1510K Trim & Upholstery Tool Set 5Pcs

Kennedy KEN503-1510K Trim & Upholstery Tool Set Five piece set of angled lever tools designed for the easy removal of vehicle trim fasteners, mouldings and wheel hubs. Ideal for use inside and outside the vehicle, the tools are manufactured from plastic to avoid marking and scratching metal, wood or upholstery materia..

Kennedy Ken503-1540K Sub Frame Bush Removal Tool Ford Moneo

Kennedy KEN503-1540K Mondeo Sub-Frame Bush Installation and Removal Tool For the Removal/Installation of rear sub-frame bushes in the Ford Mondeo. Can be used in situ, no need to remove sub-frame from vehicle. Applications: Ford Mondeo 2001, 10/2000 onwards

Kennedy Ken503-1550K Rear Bush Installation Tool VW Golf IV, AUDI A3

Kennedy KEN503-1550K Rear Axle Bush Installation Tool For the in-situ installation of the rear axle mounting bushes on selected: VW and Audi vehicles such as Audi A3, VW Bora and Golf IV.

Kennedy Ken503-1560K Radio Release Master Set 46-Pcs

Kennedy KEN503-1560K Radio Release Master Set RRM046 Radio release master set contains a comprehensive set of high quality tools suitable for authorised release and removal of in-car entertainment units. These professional tools, have a chromed finish and are manufactured from heavy-gauge materials to ensure th...

Kennedy Ken503-1570K Windscreen Wiper Arm Removal Tool

Kennedy KEN503-1570K Windscreen Wiper Arm Removal Tool Windscreen wiper arm removal tool for removing stuck and stubborn taper fitting wiper arms. Maximum opening: 27mm. Collar size: 15mm.

Kennedy Ken503-1600K Doughnut Stretcher

Kennedy KEN503-1600K Exhaust Doughnut Puller To enable fast Installation or removal of rubber anti-vibration mounting rings found on modern exhaust systems. Puller has offset hook for easier application and dipped vinyl handle for added comfort and extra grip. Manufactured from hardened steel. Length: 290mm

Kennedy Ken503-1620K Injection Pump Puller for Rover/Land Rover

Kennedy KEN503-1620K Diesel Injection Pump Puller For the removal of diesel injection pumps from the following engines: DPP010, DPP020, DPP030.

Kennedy Ken503-1630K Diesel Injection Pump Puller for BMW M47/M57

Kennedy KEN503-1630K Diesel Injection Pump Puller For the removal of diesel injection pumps from the following engines: DPP010, DPP020, DPP030.