Model

Products

Item No & Description

Kennedy Ken503-3440K Combined Puller Set (18-Pce)

KEN503-3460K Mechanical Puller Sets SWP9 Steering Wheel Suitable for GM, Ford and Chrysler vehicles. Also suitable for removing pulleys and fly wheels. Contents: 1x yoke, 1x thrust bolt. 1x thrust cap. 2x 75mm screws (5/16" x 24 UNF). 2x 75mm screws (3/8" x 16 UNC). 2x 90mm screws (5/16" x 18 UNC). 1x p...

Kennedy Ken503-3460K Dent Puller Set (9-PCE)

KEN503-3460K Dent Puller Set For repairing accidental dents in work panels. For repairing dents in body panels. Supplied complete with self tapping...

Kennedy Ken503-3480K Slide Hammer/Puller Set (16-Pce)

KEN503-3480K Slide Hammer Puller Set Multi-function Fully hardened and chromed carbon steel slide hammer with a 1.2kg weight. Slide hammer design for removing bearings from blind housings. Suitable for use where a shaft or other solid surface is not available for a thrust bolt or hydraulic ram to push ...

Kennedy Ken503-3500K Hydraulic Puller Set (18-Pce)

KEN503-3500K 6 Way Hydraulic Puller Set 10 ton capacity hydraulic ram with tommy bar. Supplied with three position puller legs covering a spread of 50 - 250mm and reach of 0 - 250mm. Can be used as a two or three legged puller with the same head. Contents: 1x combination head. 1x hydraulic ram. 3x thre...

Kennedy Ken503-3520K Hydraulic Puller Set (25-Pce)

KEN503-3520K Hydraulic Puller/ Separator Set 10 ton capacity hydraulic ram with tommy bar. Suitable for agricultural machines, garage and industrial use. Contents: 1x hydraulic ram (KEN- 503-7200K). 3x 4¡¨, 6¡¨ and 8¡¨ puller legs. 1x twin head. 1x triple head. 1x 50mm ram extension. 1x 100mm ram e...

Kennedy Ken503-4090K 3/8-1/2" (9-12mm) Size 1 Nut Splitter

Kennedy KEN503-4090K Nut Splitters Mechanical drop forged, hardened and tempered plated steel. Ideal for releasing seized/damaged nuts etc.

Kennedy Ken503-4160K 1/2-5/8" (12-16mm) Size 2 Nut Splitter

Kennedy KEN503-41600K Nut Splitters Mechanical drop forged, hardened and tempered plated steel. Ideal for releasing seized/damaged nuts etc.

Kennedy Ken503-4220K 5/8-7/8" (16-22mm) Size 3 Nut Splitter

Kennedy KEN503-4220K Nut Splitters Mechanical drop forged, hardened and tempered plated steel. Ideal for releasing seized/damaged nuts etc.

Kennedy Ken503-4270K 7/8-1.1/16" (22-27mm) Size 4 Nut Splitter

Kennedy KEN503-4270K Nut Splitters Mechanical drop forged, hardened and tempered plated steel. Ideal for releasing seized/damaged nuts etc.

Kennedy Ken503-4290K 9-27mm Steel Nut Splitter (Set-4)

Kennedy KEN503-4290K Nut Splitters - 4 Piece Set Mechanical drop forged, hardened and tempered plated steel. Ideal for releasing seized/damaged nuts etc. 4 Piece Set Contents (1 of each): No.1, No.2, No.3, No.4.

Kennedy Ken503-4300K Hydraulic Nut Splitter Set (8-Pce)

Kennedy KEN503-4300K Hydraulic Nut Splitter Set The hydraulic ram provides up to 10 tonnes of direct non-twisting application of thrust that is more effective and secure than a mechanical thrust screw. Fully threaded body allows for quick and easy height adjustment. The splitter bodies are manufactured from ca...

Kennedy Ken503-4520K 50mm Bearing Separatpr

Kennedy KEN503-4520K Bearing Separators For removing bearings, gears and bushes from shafts where access with a mechanical puller is restricted. Separators have tapered edge for insertion behind close fitting bearings, gears and bushes. Jaw hardness: 42¢X - 45¢X HRC.

Kennedy Ken503-4540K 57mm Bearing Separator

Kennedy KEN503-4540K Bearing Separators For removing bearings, gears and bushes from shafts where access with a mechanical puller is restricted. Separators have tapered edge for insertion behind close fitting bearings, gears and bushes. Jaw hardness: 42¢X - 45¢X HRC.

Kennedy Ken503-4560K 100mm Bearing Separator

Kennedy KEN503-4560K Bearing Separators For removing bearings, gears and bushes from shafts where access with a mechanical puller is restricted. Separators have tapered edge for insertion behind close fitting bearings, gears and bushes. Jaw hardness: 42¢X - 45¢X HRC.

Kennedy Ken503-4580K 150mm Bearing Separator

Kennedy KEN503-4580K Bearing Separators For removing bearings, gears and bushes from shafts where access with a mechanical puller is restricted. Separators have tapered edge for insertion behind close fitting bearings, gears and bushes. Jaw hardness: 42¢X - 45¢X HRC.

Kennedy Ken503-4700K Hydraulic Bearing Separator Set 105-150mm

Kennedy KEN503-4700K Hydraulic Separator Sets HS7 105 - 150mm HS11 75 - 105mm For removing bearings, gears, sprockets and bushes. 10 ton capacity hydraulic ram with tommy bar. Metal storage case. Both sets contain: 1x hydraulic ram. 1x separator. 2x 200mm main rods. 2x 230mm extension rods. 1x beam. 1x r...

Kennedy Ken503-4720K Hydraulic Baring Separator Set 75-105mm

Kennedy KEN503-4720K Hydraulic Separator Sets HS7 105 - 150mm HS11 75 - 105mm For removing bearings, gears, sprockets and bushes. 10 ton capacity hydraulic ram with tommy bar. Metal storage case. Both sets contain: 1x hydraulic ram. 1x separator. 2x 200mm main rods. 2x 230mm extension rods. 1x beam. 1x r...

Kennedy Ken503-4750K Mechanical Bearing Separator Set 30-75mm

Kennedy KEN503-4750K Mechanical Separator Set 30 - 75mm For removing bearings, gears, sprockets and bushes. Metal storage case. Contents: 1x 7¡¨ thrust bolt. 1x 30 - 50mm separator. 1x 50 - 75mm separator. 2x 80 and 100mm main rods. 2x 90 and 110mm extension rods. 1x beam.

Kennedy Ken503-4810K Heavy Duty Hose Clip Pliers Click Compatible

Kennedy KEN503-4810K Heavy Duty Hose Clip Pliers - Clic Compatible With steel Jaws and PVC coated handles, these spring loaded heavy duty dual purpose pliers are designed for fitting and removing Clic and Clic-R® hose clips.

Kennedy Ken503-4820K Extra Heavy Duty Ear Type Clip Pliers

Kennedy KEN503-4820K Extra Heavy Duty Ear Type Clip Pliers These Pliers have steel jaws, PVC coated handles and a 1/2 inch sq. for use with torque wrenches and bar breakers. Suitable for all ear type CVJ boot clips

Kennedy Ken503-4910K Brake Pin Punch 165mmx5.5mm

Kennedy KEN503-4910K Brake Pin Punches Parallel pin punches for the removal of brake caliper pad retaining pins. 5.5mm diameter punch uses a pilot tip to aid location in hollow pins used on GM/Vauxhall calipers. Overall length: 165mm.

Kennedy Ken503-4940K Brake Spring Washer Tool

Kennedy KEN503-4940K Brake Spring Cup Washer Tool Removes and replaces T-slot anti-rattle spring washers found in drum brake assemblies. Hardened and tempered carbon steel shank and cup with oxidised finish for protection against corrosion, bevelled and notched cup fits 16 - 22mm (5/8" - 7/8") diameter. Impact ...

Kennedy Ken503-4960K Brake Clip Tool

Kennedy KEN503-4960K Brake Clip Tool Designed for import cars with brake shoe hold down clips. Removes and installs brake clip and nail on brake shoes in seconds. Impact resistant square section handle for secure grip even when greasy. Overall length: 200mm (8¡¨).